武漢格萊莫檢測設備有限公司  

電話：13545068882；027-86619889

傳真：027-86619889  

網址：www.glmgs.com

http://www.glmgs.com/prodxx.asp?id=444

一、產品簡介
    本系列電阻爐系周期作業式、供實驗室、工礦企業、科研單位、院校作元素分析測定和一般小型鋼件淬火、退火、回火等熱處理時加熱用，高溫爐還可作金屬、陶瓷的燒結、溶解、分析等高溫加熱用。控溫儀表分為：指針式 A：數顯式 AS：智能式 ASP：智能多段
二、技術指標
    ★額定溫度 (℃):1300
    ★工作電壓(V):220
    ★額定功率(KW):2.5
    ★空載升溫時(Min):≤40
    ★爐膛尺寸(mm)(L×W×H):φ22-2×600
    ★外形尺寸 (mm) (L×W×H):600×280×400
    ★配套控制器型號:KSY-6D-16
    ★重量(KG):32
三、產品特點
    ★外殼采用冷軋鋼板制成，表面噴塑工藝處理，爐門采用側開式結構，啟閉靈活。
    ★中溫箱式爐采用封閉型爐膛，以電熱合金絲為加熱元件制成螺旋形后，盤繞于爐膛四壁之中，散熱時爐溫均勻延長了使用壽命。
    ★高溫管式電阻爐采用高溫燃燒管，以硅碳棒作為加熱元件在爐膛外套內安裝。
    ★高溫箱式電阻爐以硅碳棒為加熱元件，直接在爐膛內安裝，熱利用率高。
    ★本系列電阻爐保溫材料選用輕質泡沫保溫磚以及硅酸鋁纖維棉，使其蓄熱量和導熱系數減少致使?fàn)t膛蓄熱量大升溫時間縮短，表面溫升低，空爐損耗率小，耗電量也大大降低。

One, product introduction
This series of resistance furnace is a batch type, for laboratory, industrial and mining enterprises, scientific research units, colleges and universities for determination of elements and general small steel parts quenching, annealing, tempering heat treatment heating, high temperature furnace can also be made of metal, ceramic sintering, dissolution, high temperature heating analysis. Temperature control instrument is divided into: pointer type A: digital display type AS: intelligent ASP: intelligent multi segment
Two, technical indicators
★rated temperature ( c ): 1300
★working voltage ( V ): 220
★rated power ( KW ): 2.5
★no-load temperature ( Min≤ 40 ):
★furnace size ( mm ) ( L ×W ×H ):φ22-2 × 600
★dimensions ( mm ) ( L ×W ×H ): 600 x 280 x 400
★matching controller type: KSY-6D-16
★weight ( KG ): 32
Three, product characteristics
★the shell is made of good quality steel material, surface spray processing, door adopts a side open type structure, flexible opening and closing.
★moderate box-type furnace adopts a closed type furnace, electric heating alloy wire as the heating component into a spiral, coiled on the furnace walls, heat dissipation when a uniform furnace temperature and prolongs the service life.
★high temperature tubular resistance furnace adopts the high temperature combustion, takes silicon carbide rod as heating element in the chamber mounted within the outer sleeve.
★high temperature box type resistance furnace with silicon carbide as a heating element, directly in the furnace installation, high heat utilization rate.
In this series of resistance furnace thermal insulation material made of light foam insulating brick and aluminum silicate fiber cotton, make the accumulation of heat and heat conductivity coefficient reduced resulting in the great heat storage heating time is shortened, low surface temperature rise, air furnace low loss rate, the power consumption is greatly reduced.