產品標題:8C-TAIXB1單端模擬量輸入模塊安裝底板，冗余，帶涂層

型號： 8C-TAIXB1

品牌：霍尼韋爾

                                                                              產品詳情資料：

PI模塊包括三個隔離的輸入通道。每個輸入通道獨立處理輸入到模塊的所有數據，并將數據傳遞給主處理器，主處理器對數據進行投票，以確保的完整性。每個模塊在每個通道上提供***持續診斷。任何通道上的任何診斷故障都會***故障指示燈，進而***底盤報警信號。故障指示燈僅指示通道故障，而不是模塊故障。***模塊在出現單一故障時能夠正常運行，并且在出現某些類型的多個故障時能夠繼續正常運行。脈沖輸入模塊支持熱備用模塊。警告：PI模塊不提供累加功能，是為測量旋轉設備的速度而優化的。對于3515型脈沖累加，繼電器輸出模塊3636R/T型繼電器輸出（RO）模塊是一種非三重模塊，用于與“***”固態輸出開關不兼容的非關鍵點。一個例子是與信號器面板接口。繼電器輸出模塊在三個通道中的每個通道上接收來自主處理器的輸出信號。然后對這三組信號進行表決，表決后的數據用于驅動32個單獨的繼電器。每個輸出都有一個環回電路，該電路獨立于負載的存在來驗證每個繼電器開關的操作同時進行診斷以測試模塊的操作狀態。任何診斷故障都會***故障指示燈，進而***底盤警報。

                         產品英文詳情料:

The PI module includes three isolated input channels. Each input channel independently processes all data input to the module and passes the data to the main processors, which vote on the data to ensure the highest integrity. Each module provides complete ongoing diagnostics on each channel. Failure of anydiagnostic on any channel activates the Fault indicator, which in turn activates the chassis alarm signal. The Fault indicator merely indicates a channel fault, not a module failure. The module is guaranteed to operate properly in the presence of a single fault and may continue to operate properly with certain kinds of multiple faults. The pulse input module supports hotspare modules. WARNING: The PI module does not provide a totalization capability—it is optimized for measuring the speed of rotation equipment. For pulse totalization model 3515,Relay Output Module The model 3636R/T Relay Output (RO) Module is a non-triplicated module for use on non-critical points which are not compatible with “high-side” solid-state output switches. An example is interfacing with annunciator panels. The relay output module receives output signals from the main processors on each of three channels. The three sets of signals are then voted, and the voted data is used to drive the 32 individual relays. Each output has a loopback circuit which verifies the operation of each relay switch independently of the presence of a load, while ongoing diagnostics test the operational status of the module. Failure of any diagnostic activates the Fault indicator, which in turn activates the chassis alarm.

免責聲明：

AMIKON我們銷售新產品和停產產品，獨立渠道購買此類特色產品。阿米控不是本網站特色產品的授權分銷商、經銷商或代表。本網站上使用的所有產品名稱/產品圖片、商標、品牌和徽標均為其各自所有者的財產。帶有這些名稱,圖片、商標、品牌和徽標的產品描述、描寫或銷售僅用于識別目的，并不表示與任何權利持有人有任何關聯或授權。