產品標題:8C-SDOXO1數子量輸出交流繼電器擴展端子板，32通道，帶涂層

型號： 8C-SDOXO1

品牌：霍尼韋爾

                                                        產品詳情資料：

前面板上的設置LED及其各自的輸出信號如下：無LED自我監控IRF P1/In（%）高壓側階段啟動?I01>P2/In（%）高壓側級運行?I01>I01/In高壓側中性電流If2/I1f（I01）>阻斷I02/In低壓側階段啟動?I02>I2f/I1f（I01）>低壓側級的操作?I02>I2f/I1f（I02）>低壓側中性電流I2f/I1f（I02

選擇外部控制信號BS1…5和互調阻斷信號BSINT1…3的邏輯***狀態。當開關處于位置0時，當電壓（DC電壓18…265 V或AC電壓80…265 V）施加到控制輸入時，信號***（狀態1）。當開關處于位置1時，當沒有電壓施加到控制輸入時，信號***。

                          產品英文詳情資料：

he setting LEDs on the front panel and their respective output signals are as follows:No LED Self-supervision IRF P1/In (%) Start of HV side stage ?I01> P2/In(%) Operation of HV side stage ?I01> I01/In HV side neutral current If2/I1f(I01)> blocking I02/In Start of LV side stage ?I02> I2f/I1f(I01)> Operation of LV side stage ?I02> I2f/I1f(I02)> LV side neutral current I2f/I1f(I02)> blocking I1/In External control signal BS1 I2/In External control signal BS2 SGF External control signal BS3 SGB External control signal BS4 SGR External control signal BS5

Selection of the logic active state of the external control signals BS1...5 and the intermodular blocking signals BS INT1...3. When the switch is in position 0, the signal is active (state 1), when voltage, either DC voltage 18...265 V or AC voltage 80...265 V, is applied to the control input. When the switch is in position 1, the signal is active when no voltage is applied to the control input.

免責聲明：

AMIKON我們銷售新產品和停產產品，獨立渠道購買此類特色產品。阿米控不是本網站特色產品的授權分銷商、經銷商或代表。本網站上使用的所有產品名稱/產品圖片、商標、品牌和徽標均為其各自所有者的財產。帶有這些名稱,圖片、商標、品牌和徽標的產品描述、描寫或銷售僅用于識別目的，并不表示與任何權利持有人有任何關聯或授權。